The Raptor™ Series:  RAP6    (Click Here for Product Options)

The RAP6™ is extremely efficient. The design of the extruded aluminum housing allows no convective airflow throughthe fixture – meaning no cold air is pulled across the lamps (which could lower lumen output); any suspended dirt/dustin the environment won’t be pulled through either – the RAP6™, with our standard lens option, stays clean even in filthyenvironments. Use it for distribution centers, warehouses, ice rinks, gymnasiums, hangars, cold storage facilities, manufacturingand other highbay applications, in ambient temperatures from -20F (-30C) up to (using a 90C rated ballast) 150F (65C). UL/CUL Damp Location Listed.


It’s .060” anodized, extruded aluminum. We’ve added wings to a wider version of the RAP1™ channel for more ballast capacity, and to increase the radiative mass for additional thermal transfer – keeping lamp heat from damaging the sensitive electronics in the ballast via our integral ballast heat-sink. The reflector assembly is unitized for easy access to the ballast/wiring compartment without removing lamps. 1/2" conduit entry hole in each end, top feed hole option available. Clear anodized standard finish, anodized colors available.


The RAP6™ uses 330 input Watts – 9% less than the competition! HF electronic programmed start, multi-volt ballasts. Specify 120-277V or 347-480V. Dimming is available, too, line-voltage, 0-10V, even DALI. Seismic make-and-break captive rotor lamp sockets. Lamps are 85 CRI with .95 lumen maintenance over life, and are rated to 40,000 hours life at 12 hours per start.


95% reflective specular hard-anodized aluminum roll-formed engineered T5 reflector. Very uniform in the horizontal & vertical planes. Our Uplight option uses a dedicated, separately-switchable up-lamp with specular reflector and protective spread lens…not mere uplight holes in our reflectors (which affects downlight distribution, and allows that pesky convective airflow across the lamps). Optional 0.125" clear acrylic or polycarbonate lens in captive, hinged/latched anodized aluminum door frame.


The RAP6™ is provided with pair of integral hanging tabs that will accept chain or cable, allowing suspension without penetrating the fixture body. Other mounting options are available – we can match any existing mounting means!

Fixture Weight

RAP6™ 4’-0” length: 15 lbs. 5 oz.

Specification Sheet

IES File

Uplight IES File