The Raptor™ Series:  RAP3    (Click here for Product Options)

The RAP3™ is a powerful unit that performs well in a variety of application. The design of the extruded aluminum housing allows no convective airflow through the fixture – meaning no cold air is pulled across the lamps (which could lower lumen output); any suspended dirt/dust in the environment won’t be pulled through either – the RAP3™, with our standard lens option, stays clean even in filthy environments. Use it for applications from task lighting to HID lowbay/highbay replacement, in ambient temperatures from -20F (-30C) up to (using a 90C rated ballast) 150F (65C). UL/CUL Damp Location Listed.


It’s .060” anodized, extruded aluminum. We’ve added wings to the RAP1™ channel, to increase the radiative mass for additional thermal transfer – keeping lamp heat from damaging the sensitive electronics in the ballast via our integral ballast heat-sink. The reflector assembly is unitized for easy access to the ballast/wiring compartment without removing lamps. 1/2" conduit entry hole in each end, top feed hole option available. Clear anodized standard finish, anodized colors available.


The RAP3™ uses 170 input Watts – 6% less than the competition. HF electronic programmed start, multi-volt ballasts. Specify 120-277V or 347-480V. Dimming is available, too, line-voltage, 0-10V, even DALI. Seismic make-and-break captive rotor lamp sockets. Lamps are 85 CRI with .95 lumen maintenance over life, and are rated to 40,000 hours life at 12 hours per start.


95% reflective specular hard-anodized aluminum roll-formed engineered T5 reflector. Very uniform in the horizontal & vertical planes. Optional 0.125" clear acrylic or polycarbonate lens in captive, hinged/latched anodized aluminum door frame.


The RAP3™ is provided with pair of QuickClips™ snap-on full-hard stainless steel mounting clips that will accept chain, cable or threaded rod, allowing suspension without penetrating the fixture body. QuickClips™ install anywhere along the fixture body, and positively lock without tools; they have a withstand rating in excess of 70X the RAP3™ luminaire weight. Other mounting options are available – we can match any existing mounting means!

Fixture Weight

RAP3™ 4’-0” length: 11 lbs. 1 oz.