The Raptor™ Series:  RAP1  (Click Here for Product Options)

This is the backbone of the RAPTOR™ series – use the RAP1™ anywhere you would use a strip, channel, open industrial, or cove product. It provides 10% uplight, with mechanical lamp protection from it’s snap-on DR acrylic lens. The RAP1™ can be ordered in one-foot increments starting with 2’-0”; our ‘CR’ continuous row option allows spline-joining units for seamless long runs. UL/CUL Damp Location Listed.


2” W x 2 ¾” H, one-piece clear-anodized extruded aluminum housing (very robust!) with integral ballast heat-sink. Ballast/wiring compartment easily accessed for servicing. 1/2" conduit entry hole in each end of housing with closure plug.


HF electronic programmed start multi-volt ballast. Seismic make-and-break captive rotor sockets. UL/CUL listed. Lamps are 85 CRI with .95 lumen maintenance over life, and are rated at 40,000 hours life at 12 hours per start.


95% reflective specular hard-anodized aluminum roll-formed engineered T5 reflector. Extruded DR acrylic linear-prismed snap-on lens with smooth exterior face for ease of cleaning. 10% uplight component.


The RAP1TM is provided with pair of Quick-clips™ snap-on full-hard stainless steel mounting clips that will accept #12 S-hook & chain or 1/4" threaded rod, as well as allow surface mounting without penetrating fixture body.  Quick-clips™ install anywhere along the fixture body, and positively lock without tools; they have a withstand rating in excess of 100x the RAP1™ weight. Optional CR Continuous Row mounting available.

Fixture Weight

RAP1™ 4-foot length: 4 lbs. 10 oz.